Metal Stamped Parts
Terminals, connectors, busbars, lead frames, shields and assemblies — stamped on high-speed presses up to 300 SPM with ±0.005 mm positioning precision, IATF 16949 certified.
Trusted Tier-1 & OEM Standards:

STAMPED PARTS
Terminals
Terminals are necessary to connect various circuits or systems. Sometimes called electrical connectors, these components are used to transfer electrical current from a power or…
View Details
STAMPED PARTS
Wire & Cable Connectors
Wire and cable connectors, also known as crimp terminals, crimp wire connectors, crimp cable connectors and eyelet terminals serve a simple but essential purpose of connecting…
View Details
STAMPED PARTS
Assemblies
Metal assemblies are finished units or sub-assemblies built from two or more stamped components — often combined with plastic parts, hardware and inserts. A stamped metal assembly…
View Details
STAMPED PARTS
Brackets
Brackets are structural stamped components used to mount, support or secure parts in applications across buildings, automotive, electronics and appliances.
View Details
STAMPED PARTS
Bus Bars
Busbars are flat conductive strips used to distribute electrical power within battery packs, power distribution units, inverters and charging infrastructure.
View Details
STAMPED PARTS
Bent Busbars
Bent busbars are formed copper conductors with complex 3D geometry - multi-plane bends, offsets and twist forms that route power around obstacles in tight assemblies.
View Details
STAMPED PARTS
Lead Frames
Lead frames are precision stamped metal carriers used in semiconductor packaging - providing the electrical connection path between the die and the external circuit. A surface…
View Details
STAMPED PARTS
Shields
EMI shielding stops electromagnetic interference from leaving or entering a device, and RFI shielding does the same for radio-frequency noise. Stamped metal shielding is how most…
View Details
STAMPED PARTS
Clips
Metal clips are one-piece stamped parts that hold, retain, ground or conduct — spring clips, retaining clips, battery clips and contact clips formed from spring-temper strip on…
View Details
STAMPED PARTS
Thin-Gauge Lead Frames & Precision Stampings
Yes — ISTAMPING stamps lead frames and precision contact parts in thin strip from 0.05 mm (0.002 in) up, holding ±0.005 mm positional tolerance on piloted features using…
View Details
STAMPED PARTS
Heavy-Gauge & Galvanized Steel Stampings
Yes — ISTAMPING stamps formed, heavy-gauge steel parts from 1.5 mm up to 3.0 mm on dedicated 45 to 110 ton presses, and we support both routes your drawing might call for:…
View Details
STAMPED PARTS
Stamped Battery Contact Blades
Yes — battery contact blades are a standard part we stamp: formed from beryllium copper C17200 or phosphor bronze on multi-up progressive dies, plated to your drawing's plating…
View DetailsPart Family
Thin-Gauge Spring & Clip Stampings
Springs, clips and battery contacts are the thin end of what we stamp: 0.05–3.0 mm strip, blanked and formed on progressive dies at ±0.005 mm positioning and up to 300 SPM. These parts are bought by the million, so the die layout, material utilisation and run-at-rate stability move the unit price more than the geometry does.
That is why this family runs at a price-competitive unit cost instead of as a premium niche: multi-cavity progressive tooling, in-line vision on every stroke, and reels delivered for automated assembly. Material, plating build and edge condition are confirmed against your drawing during the DFM pass — plating follows your drawing through approved partner lines and is verified per lot.
Ready to Start Your Precision Stamping Program?
Progressive die stamping, in-house tooling and assembly — from prototype to mass production. Send your drawing and volume, get a fast engineering-reviewed quote.